-40%
SpeedyBee F405 Wing F405Wing APP 2-6S Flight Controller ELRS / CRSF Receiver VTX
SpeedyBee F405 Wing F405Wing APP 2-6S Flight Controller ELRS / CRSF Receiver VTX
SpeedyBee F405 Wing F405Wing APP 2-6S Flight Controller ELRS / CRSF Receiver VTX
SpeedyBee F405 Wing F405Wing APP 2-6S Flight Controller ELRS / CRSF Receiver VTX
SpeedyBee F405 Wing F405Wing APP 2-6S Flight Controller ELRS / CRSF Receiver VTX
SpeedyBee F405 Wing F405Wing APP 2-6S Flight Controller ELRS / CRSF Receiver VTX

SpeedyBee F405 Wing F405Wing APP 2-6S Flight Controller ELRS / CRSF Receiver VTX

$ 26.32

Availability: 45 in stock
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Type: Flight Controller
  • Condition: New
  • Brand: jmt

    Description

    SpeedyBee F405 Wing F405Wing APP 2-6S FC Flight Controller ELRS/CRSF Receiver VTX/ Servo BEC WS2812 LED
    Product Name:
    SpeedyBee F405 WING FC board;
    -MCU: STM32F405,168MHz,1MB Flash;
    -IMU(Gyro&Accelerometer): ICM-42688-P;
    -Barometer: SPL006-001;
    -OSD Chip: AT7456E;
    -Blackbox: MicroSD Card Slot;
    -UART: 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection));
    -I2C: 1x Used for magnetometer, digital airspeed sensor;
    -ADC: 4x (VBAT, Current, RSSI, Analog AirSpeed);
    -PWM: 12x (11+1 "LED" pad);
    -ELRS/CRSF receiver: Supported,connected to UART1;
    -SBUS: Built in inverter for SBUS input (UART2-RX);
    -LED: 3xLEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1xRGB;
    -RSSI: Supported,Named as RS;
    Supported FC Firmware: INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING
    Product Name:
    SpeedyBee F405 WING PDB board;
    -Input voltage range: 7~36V (2~6S LiPo);
    -Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot);
    -Battery Current Sensor: 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot);
    -TVS Protective diode: Yes;
    -FC BEC output: Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS m module, Telemetry module, WS2812 LED_Strip;
    -VTX BEC output: Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.
    -Servo BEC output: Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, Designed for Servos.
    Product Name:
    SpeedyBee F405 WING Wireless board
    Wireless Configuration (long press BOOT button for 6 seconds to switch modes):
    -BLE mode, connect to Speedybee APP;
    -Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.
    -Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner
    LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes)
    -4x WS2812 LED strip connectors, adjustable colors and flashing modes
    -4x WS2812 LED strip connectors, adjustable colors and flashing modes
    On-board battery level indicator
    -4x RGB indicator LED for battery level display by number of lights
    SpeedyBee F405 WING F405Wing APP FC board ICM42688P Flight Controller for RC Fixed Wing Model Airplane
    Specifications
    Product Name
    SpeedyBee F405 WING FC board
    MCU
    STM32F405,168MHz,1MB Flash
    IMU(Gyro&Accelerometer)
    ICM-42688-P
    Barometer
    SPL006-001
    OSD Chip
    AT7456E
    Blackbox
    MicroSD Card Slot
    UART
    6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection))
    I2C
    1x Used for magnetometer, digital airspeed sensor
    ADC
    4x (VBAT, Current, RSSI, Analog AirSpeed)
    PWM
    12x (11+1“LED”pad)
    ELRS/CRSF receiver
    Supported,connected to UART1
    SBUS
    Built in inverter for SBUS input (UART2-RX)
    LED
    3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB
    RSSI
    Supported,Named as RS .
    Supported FC Firmware
    INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING
    Weight
    8.9g
    Product Name
    SpeedyBee F405 WING PDB board
    Input voltage range
    7~36V (2~6S LiPo)
    Battery Voltage Sensor
    Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
    Battery Current Sensor
    90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
    TVS Protective diode
    Yes
    FC BEC output
    Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip
    VTX BEC output
    Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.
    Servo BEC output
    Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.
    Weight
    11.4g
    Product Name
    SpeedyBee F405 WING Wireless board
    Wireless Configuration (long press BOOT button for 6 seconds to switch modes)
    BLE mode, connect to Speedybee APP
    Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.
    Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner
    LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes)
    4x WS2812 LED strip connectors, adjustable colors and flashing modes
    Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads
    On-board battery level indicator
    4x RGB indicator LED for battery level display by number of lights
    Weight
    4.2g
    Thank you for you choose our product , we are trustworthy ,if you have any questions ,please message us freely , we would like to try our best to solve your issue .